Description

This buggy was built from scratch. The main frame is 1 1/4" steel tube, with 1" ladder bars on the rear. It has a Honda CB 750 motor with 836 big bore kit, aluminum rods and 12:1 forged pistons which prefers race gas. The rear ladder bars give it 12" of travel, and about 8" on the front at which point the rear bottoms out. The entire buggy has a ride height of 11-12" depending on tire selection. I have a set of 22" 10 paddle scats, a set of 25" 18 paddle scats, as well as sand tires for front all on 10" aluminum rims. I also have dorky set of rear street tires. It has a oil pressure and temp gauge, volt meter, and shift light. I do not know top speed, but buggy was originally set up for sand drags and ran 4 seconds in 300 ft, in 2nd gear, by previous owner. I set it up for dunes this summer, and what a smooth and fun ride.